Basic Info.
Cutting Material
Carbon Steel, Aluminum, Stainless Steel
Power Source
Hydraulic Pressure
Type for Pipe and Tube Bending Machine
Press Brake
Processing
Aluminum,Stainless Steel Plate,Carbon Steel
Transport Package
Stand Exporting Package
Product Description
Specification:
1.All steel welded structure,vibrating treatment of aging for removal of internal stress with high
strength and good rigidity.
2.Torsion shaft forced synchronization of mechanical limit stopper balance with high precision.
3.Integrated hydraulic transmission system, large range of speed regulation to transmission of the
sliding block, stable and reliable performance.
4.Rear stopper and the sliding block have electrical adjustment for their stroke with manual fine
tuning and digital indication.
5.Adjustment mechanism of sliding block independent from oil cylinder assembly to enhance sealing effect upper mold is fitted with titling warp offset mechanism.
6.Multiple machine combined operation is possible.
Standard Feature:
• Hydraulic oil circuit all with bite fittings
• Downstroke bending beam,actuated by two cylinders
• Rigidly welded, monoblock steel frame for minimum deflection under load
• Ram travel fully supported in low friction pertinax slideways, which are easily adjustable
• Patented hydro-mechanical system for exact parallelism and a high repeat accuracy
• Solid torsion-bar linkage for ram leveling
• Ram stroke control by precision mechanical-stops built into each cylinder and electrically adjusted by push-buttons with a digital position display on cnc control panel
• Independent position control of one cylinder-stop to provide fine angle adjustment and/or conical bending possibility
• High stroke and daylight values to accommodate tooling variety
• Pressure switch and gauge to regulate bending tonnage easily and to prevent overbending due to bottoming of tools
• Hydraulic overload protection
• Pre-set, two-speed bending cycle giving fast approach, slow bending and fast return
• 3-function footswitch: normal bending, beam pause at any stroke point, automatic beam return upon release of footswitch
• Compact, low-maintenance hydraulic manifold
Technical Parameters:
Model (WC67Y) | Nominal Pressure (kn) | Length of table (mm) | Distance Between Housing (mm) | Throat Depth (mm) | Stroke (mm) | Open High (mm) | Main Motor (kW) | Dimensions (L x W x H) (mm) |
40/2200 | 400 | 2200 | 1800 | 220 | 100 | 340 | 4 | 2260x1200x2070 |
40/2500 | 400 | 2500 | 2000 | 220 | 100 | 350 | 4 | 2560x1200x2070 |
50/2500 | 500 | 2500 | 2000 | 250 | 100 | 350 | 4 | 2560x1200x1900 |
63/2500 | 630 | 2500 | 2000 | 250 | 120 | 350 | 5.5 | 2560x1250x2110 |
63/3200 | 630 | 3200 | 2600 | 250 | 120 | 350 | 5.5 | 3260x1250x2110 |
80/3200 | 800 | 3200 | 2600 | 250 | 120 | 370 | 7.5 | 3260x1250x2190 |
80/4000 | 800 | 4000 | 3200 | 250 | 120 | 370 | 7.5 | 4060x1320x2250 |
100/3200 | 1000 | 3200 | 2600 | 320 | 120 | 380 | 7.5 | 3260x1350x2400 |
100/4000 | 1000 | 4000 | 3200 | 320 | 120 | 380 | 7.5 | 4060x1350x2420 |
125/3200 | 1250 | 3200 | 2600 | 320 | 120 | 400 | 11 | 3260x1420x2550 |
125/4000 | 1250 | 4000 | 3200 | 320 | 120 | 400 | 11 | 4060x1420x2550 |
160/3200 | 1600 | 3200 | 2600 | 320 | 200 | 480 | 11 | 3260x1520x2700 |
160/4000 | 1600 | 4000 | 3200 | 320 | 200 | 480 | 11 | 4060x1520x2800 |
160/5000 | 1600 | 5000 | 4000 | 320 | 200 | 480 | 11 | 5060x1700x2850 |
160/6000 | 1600 | 6000 | 5000 | 320 | 200 | 480 | 11 | 6060x1700x2900 |
200/3200 | 2000 | 3200 | 2600 | 350 | 200 | 490 | 15 | 3260x1600x2850 |
200/4000 | 2000 | 4000 | 3200 | 350 | 200 | 490 | 15 | 4060x1600x2880 |
200/5000 | 2000 | 5000 | 4000 | 350 | 200 | 490 | 15 | 5060x1800x2950 |
200/6000 | 2000 | 6000 | 5000 | 350 | 200 | 490 | 15 | 6060x1800x3000 |
250/4000 | 2500 | 4000 | 3200 | 400 | 250 | 560 | 18.5 | 4060x2100x2920 |
250/5000 | 2500 | 5000 | 4000 | 400 | 250 | 560 | 18.5 | 5060x2100x2970 |
250/6000 | 2500 | 6000 | 5000 | 400 | 250 | 560 | 18.5 | 6060x2100x3050 |
300/4000 | 3000 | 4000 | 3200 | 400 | 250 | 560 | 22 | 4060X2170X3280 |
300/5000 | 3000 | 5000 | 4000 | 400 | 250 | 600 | 22 | 5060x2230x3330 |
300/6000 | 3000 | 6000 | 5000 | 400 | 250 | 600 | 22 | 6060x2230x3420 |
400/4000 | 4000 | 4000 | 3200 | 450 | 250 | 600 | 37 | 4060x2350x3300 |
400/5000 | 4000 | 5000 | 4000 | 450 | 250 | 600 | 37 | 5060x2350x3380 |
400/6000 | 4000 | 6000 | 5000 | 450 | 250 | 600 | 37 | 6060x2350x3450 |
500/4000 | 5000 | 4000 | 3200 | 500 | 300 | 660 | 45 | 4060x2600x3600 |
500/5000 | 5000 | 5000 | 4000 | 500 | 300 | 660 | 45 | 5060x2600x3600 |
500/6000 | 5000 | 6000 | 5000 | 500 | 300 | 660 | 45 | 6060x2600x3650 |
600/4000 | 6000 | 4000 | 3200 | 600 | 300 | 700 | 55 | 4060x2600x3600 |
600/5000 | 6000 | 5000 | 4000 | 600 | 300 | 700 | 55 | 5060x2600x3700 |
600/6000 | 6000 | 6000 | 5000 | 600 | 300 | 700 | 55 | 6060x2600x3800 |
The above data is just for your reference,if there is any disaccord please refer to actual data
Main Equipments:
Up and down die | SELF MADE RAW Material S6 | HEAT TREATMENT 46°-48 ° |
Cylinder | CHINA TAIFNEG | kruppmachinery.en.made-in-china.com |
Hydraulic valves | CHINA TAIFNEG | kruppmachinery.en.made-in-china.com |
Seal element | JAPAN NOK | www.nok.co.jp |
Motor | CHINA SHUANGTA | kruppmachinery.en.made-in-china.com |
Frequency converter | CHINA TAIWAN SHIHLIN | kruppmachinery.en.made-in-china.com.tw |
Main Electricals | SIEMENS | kruppmachinery.en.made-in-china.com |
Pump | | USA SUNNY | | |
X axes Ball screw | | CHINA TAIWAN HIWIN | www.hiwin.tw
|
Voltage and Current | as your country | | |
Control system | CHINA Estun E21S | kruppmachinery.en.made-in-china.com |
Standard equipment:
• Ballscrew backguage
• Limit switch all use siemens APT
• European-style top tool holders with wedge adjustment
• Standard tooling: Gooseneck top tool and multi-vee bottom tool
• Front-operated, 600 / 750 mm ballscrew backgauge with digital readout control (to 0.1 mm precision) and two finger-stops with micro-adjustable height.
• Moveble Footswitch(with emergency stop button)
• Two European design front support arms
• Hand screw clamps and chains to align and secure bottom die
• Oil tank level indicator
• Packguage with one whole waterproof plastic , easy take off and cover
Optional equipment:
• SIEMENS motor or WANNAN motor
•Estun E200P or Delem DA41 CNC system
•Linear drive guide on backguage x or z axis
•Light or laser protection
•Adjust up and down Finger Stop
•Adjust up and down linear guide front support
• Nachi Pump
Address:
Room302, Building1, Bowang Town, Ma′anshan, Anhui, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Ma′anshan Krupp Machinery Trade Co., Ltd is located in Ma′anshan Bowang
Industrial park. We are near to Nanjing South station and Nanjing Lukou airport, which is convenient to be visited.
Our company adopts international advanced management mode and imports Japanese and German technology. We are the enterprises with collection brand, research and development, design and manufacture.
We passed ISO9001: 2008 international quality system certification and has obtained many patent. All machines are with CE certification.
Our company are professional in producing metal forming machine, including CNC press brake, shearing machine, rolling machine, combined punching shearing machine, hydraulic notching machine, punching machine and all kinds ofmechanical tools, die.
We have rich clients in many countries and regions. Beside offer the machines with good quality, we also have experienced after sales service team. If thereis need, our engineers can go to the buyer′s side to offer training and installation at the earliest time.
"Quality Create Future" is our concept. We′ll try our best to achieve every product.